Altinex MT110-100/102 manual Saved

MULTITASKER™

Example:

If Input 1 is connected to all outputs, but only 1 through 4 are on, the feedback after sending the command [C4S], for slot 4, would be similar to the following:

CONFIGURATION:

Matrix:16x8, In-Offset=0, Out-Offset=0

CONNECTION	OUTPUT VOLUME
In01-Out01 ON	32/32
In01-Out02 ON	32/32
In01-Out03 ON	32/32
In01-Out04 ON	32/32
In01-Out05 OFF	32/32
In01-Out06 OFF	32/32
In01-Out07 OFF	32/32
In01-Out08 OFF	32/32
[SAVED]

FEEDBACK COMMANDS ?, ?Cn, STA1 & STA0

The next four commands are a function of both the card and the front panel and are only available with MultiTasker™ Front Panel systems that have the following firmware:

690-0122-015 = Version 015 or later.

690-0123-004 = Version 004 or later.

690-0124-018 = Version 018 or later.

Send the command [VER], and the system will respond with feedback that includes the following:

690-0122-015 690-0123-004 690-0124-018

Check the last three digits against the numbers above to determine if the option is available.

4.[?]

This command will return information about the MultiTasker™ and cards installed in the unit.

Command Format: [?Ui]

Ui = Unit ID (i = from 0 to 9)

Example:

A MultiTasker™ with Unit ID #1 has a front panel with part number MT101-105 and contains an MT110-102. Send the command [?U1] and receive the following feedback:

[(MT101-105U1)(MT110-102C04)]

MT101-105U1 = Panel Number and Unit ID MT110-102C04 = An MT110-102 is in slot 4

5.[?C]

This command will return general information about the card and its status.

Command Format: [?CnUi]

Cn = Card ID (n = # from 1 to max slots)

Ui = Unit ID (i = from 0 to 9)

Example:

The MT110-102in slot 4 has Input 1 connected to all outputs. All outputs are on. Send the command [?C4] to receive feedback status similar to the following.

[(MT110-102C04)(VR690-0152-011C04) (ON11111111C04)(MA0101010101010101C04) (MX16x8C04)(VO3232323232323232C04) (MU0C04)]

All status feedback is enclosed in brackets, “[ ]”. Each data field within the status is enclosed in parentheses. The first two characters identify the status type. The last three characters are the card’s ID.

MT110-102	= Card Model Number
VR690-0152-011	= Firmware version
ON11111111	= Output ON/OFF status
MA0101010101…	= Matrix I/O connections
MX16x8	= Matrix Configuration
VO32323232…	= Output Volume Levels
MU0C04	= Mute On/Off Status

The ON/OFF status line is read from left to right as outputs 1-8. A ‘1’ indicates the output is on and a ‘0’ indicates the output is off.

400-0132-005 11