Altinex 7.4.4 MT110-103 MENUS, Menu Mode Examples, Switch Input 2 to Output, Set Ramp Time

MULTITASKER

7.4.4 MT110-103 MENUS

Following are the menu items available on the MT110-103’s Main Menu. The expanded menu contains values that indicate the current setting or value of a parameter. The value is usually in parentheses, or otherwise indicated at the top of

a sub-menu. In some cases, additional comments are provided for clarification and are not part of the menu feedback.

CAUTION: Pay special attention to the top of each menu. After selecting the CONTROL menu, THIS CARD or a group will be identified at the top of the sub-menu. Since group functions may be modified from this menu, make sure the desired card or group is selected.

MT110-103 MAIN MENU

PRESS KEY TO SELECT

1:CONTROL

2:SETUP

3:STATUS

4:HELP

ESC: GO BACK

KEY =

7.4.5 MENU MODE EXAMPLES

All Menu Mode examples assume an MT110-103is installed in slot 4 of unit ID 1.

NOTE: The communication software you use may echo each character as it is typed when entering numeric values (not selecting menu items). For example, entering a value of 03 may appear as 0033 on the screen.

1. Switch Input 2 to Output 1

Follow the keystrokes below to connect Input 2 to Output 1.

Enter	List available systems
1	Select unit ID 1

04Select MT110-103in slot 4

1Select CONTROL Menu

5Select IN-OUT control

02Enter Input 02

01Enter Output 01

S Show new status

ESC	Return to CONTROL Menu
ESC	Return to the MAIN Menu

2.Set Ramp Time

Start from the Main Menu and set the ramp time to 10 seconds. Follow the keystrokes below.

2	Select SETUP Menu
5	Select Set Ramp Time
4	Select Ramp Time = 10 seconds
ESC	Return to SETUP menu
ESC	Return to the MAIN Menu

3. Display Card Status

Start from the Main Menu and follow the keystrokes below.

3 Displays card status

NOTE: The status will be displayed, followed by the Main Menu being redisplayed.

400-0197-006 23