MULTITASKER
7.3.SUMMARY OF COMMANDS Basic Commands
1) [VER] | Display software version |
2)[C] Display card status
3) | [CnS] | Save card settings |
4) | […S] | Save the command being sent |
5) | [CLR] | Reset card to default values |
6) | [TEST] | Test internal memory ICs |
7) | [HELP] | Display available commands |
Feedback Commands | ||
8) | [FBD] | Feedback delay on/off |
9)[?] Show system cards
10) | [?C] | Show card information |
11) | [STA1] | Enable auto feedback |
12) | [STA0] | Disable auto feedback |
13) | […F] | Show command feedback |
Card Control Commands | ||
14) | [MAT] | Set/show matrix configuration |
15) | [ON] | Turn on one or more outputs |
16) | [OFF] | Turn off one or more outputs |
17) | [IO] | Connect an input to output |
18) | [IO*] | Connect an input to all outputs |
19) | […P] | Set the path, preload for [SW] |
20) | [SW] | Switch preloaded output buffer |
21) | [OSI] | Set input offset |
22) | [OSO] | Set output offset |
23) | [VLO] | Set absolute output volume |
24) | [SEL] | Select input volume to adjust |
25) | [ + ] | Increment volume |
26) | [ - ] | Decrement volume |
27) | [MUT0] | Output volume ON |
28) | [MUT1] | Output volume OFF |
Volume Ramping Commands
29) | [RUP] | Ramp UP to maximum |
30) | [RDN] | Ramp DOWN to minimum |
31) | [RUPm] | Ramp UP to maximum |
32) | [RUPm=] | Ramp UP to a value |
33) | [RDNm] | Ramp DOWN to minimum |
34) | [RDNm=] | Ramp DOWN to a value |
35) | [RST] | Stop ramping |
36) | [RAMP] | Display ramp rate |
37)[RAMP=] Set ramp rate ID Commands
38) | [RSI] | Reset Card IDs |
39) | [SIDn] | Set all Card IDs |
40) | [SIDnCi] Set one Card ID | |
41) | [SID+] | Set Card ID offset |
42) | [RSN] | Read Card slot number |
Group Commands | ||
43) | [WR] | Groups multiple cards |
44)[RMC] Remove members from group
45)[RMG] Delete group
46) [RD] Displays group members
21 |
