Oven Cooking

Oven Vent

When the oven is in use the area near the vent may become hot enough to cause burns. Never block the vent opening.

The oven vent is located below the backguard vent shield on your range.

OVEN VENT

LOCATION Do not place plastics near the vent opening as heat from the vent could distort or melt the plastic.

Oven Light

Press the Oven Light switch on the control panel to turn the oven light on and off. The oven light is only activated by this switch.

Oven Bottom

Protect oven bottom against spillovers, especially acidic or sugary spills, as they may discolor the porcelain enamel. Use the correct pan size to avoid spillovers and boilovers. Do not place utensils or aluminum foil directly on the oven bottom.

Oven Racks

CAUTION

Do not attempt to change the rack position when the oven is hot.

Do not use the oven for storing food or cookware.

The oven has two racks. All racks are designed with a lock- stop edge.

To remove:

1. Pull rack straight out until it stops at the lock-stop position.

2. Lift up on the front of the rack and pull out.

To replace:

1.Place rack on the rack support in the oven

2.Tilt the front end up slightly. Slide rack back until it clears the lock-stop position.

3.Lower front and slide back into the oven.

Never cover an entire rack with aluminum foil or place foil on the oven bottom. Baking results will be affected and damage may occur to the oven bottom.

Rack Positions

 

RACK 7 (highest

 

position): For toasting

7

bread or broiling thin,

6

non-fatty foods.

5

4

 

RACK 6: Used for most

3

2

broiling.

1

 

Oven

RACK 5: For two rackBottom

baking.

Two Rack Baking

RACK 4: Used for most baked goods on a cookie sheet or jelly roll pan, fruit pies, or frozen convenience foods. Also use for broiling chicken pieces.

RACK 3: For casseroles, baking loaves of bread, bundt cakes or custard pies.

cont.

17

Page 18
Image 18
Amana 8113P454-60 warranty Oven Vent, Oven Light, Oven Bottom, Oven Racks