Amana 8113P765-60 Oven Cooking, Control Panel, Clock, Using the Touchpads, C De F G H K Lm N

Oven Cooking

Control Panel

A B C DE F G H

I J K LM N

The control panel is designed for ease in programming. The display window on the control shows time of day, timer and oven functions. Control panel shown includes Convect and other model specific features. (Styling may vary depending on model.)

AConvect (select models)

BBake

CBroil

DCancel

EClock

FOven Light

GFavorite

HClean

ICook & Hold

JKeep Warm

KDelay

LNumber Pads

MAutoset

NTimer

Use for convection baking and roasting.

Use for baking and roasting.

Use for broiling and top browning.

Cancels all operations except Timer and Clock.

Use to set time-of-day clock.

Use to turn the oven light on or off.

Use to set and save a specific Cook & Hold procedure.

Use to set self-clean cycle.

Bakes for a preset time, then holds food warm for 1 hour.

Use to keep cooked food warm in oven.

Programs the oven to start baking at a later time.

Use to set time and temperature.

Use to quickly set temperatures.

Sets Timer.

Note: Four seconds after pressing the number pads or the Autoset 0 pad, the time or temperature will automati- cally be entered. If more than 30 seconds elapse between touching a function pad and the number pads or the Autoset 0 pad, the function will be canceled and the display will return to the previous display.

Clock

The clock can be set to display time in a 12-hour or 24-hour format. The clock is set at the factory for the 12-hour format.

To change the clock to

24-hour format:

1.Press and hold the Cancel and Favorite pads for three seconds.

• 12 Hr flashes in the display.

2.Press the Autoset 0 pad to select 24 Hr; press again to select 12 Hr.

3.Set the time of day following the directions in the To set the Clock section.

To set the Clock:

Using the Touchpads

•Press the desired pad.

•Press the number pads to enter time or temperature.

•Press the Autoset 0 pad to enter temperature.

•A beep will sound when any pad is touched.

•A double beep will sound if a programming error occurs.

1.Press the Clock pad.

•The time of day flashes in the display.

2.Press the appropriate number pads to set the time of day.

•Colon flashes in the display.

3.Press the Clock pad again or wait four seconds.

•The colon will remain on.

When electrical power is supplied or after a power interruption, the last clock time before power was interrupted

will flash. cont.

8