Delayed
1.Prepare oven for
2.Press CLEAN pad.
•“CLEAN”, “TIME”, and “— — —
3.Press 
or 
pad until desired amount of cleaning time is displayed.
•“3:00” displays when 
or 
is pressed.
•Increase or decrease cleaning time in 5 minute increments.
•Clean can be set from 2 to 4 hours. Minimum recommended cleaning time is 3 hours.
4.Press STOP TIME pad.
5.Press 
or 
pad until desired stopping time appears in display.
•Starting time is automatically calculated based on amount of cleaning time and stop time.
•“DELAY”, “CLEAN, “STOP”, “TIME”, “CLEAN”, and “LOCK” display. “LOCK” flashes in display when automatic door latch is locking.
•To view remaining cleaning time, press and hold CLEAN pad.
•To view calculated stop time, press and hold STOP TIME pad.
6.Press OVEN CANCEL pad when finished.
•When oven has cooled to a safe temperature, door latch opens and “LOCK” light flashes. When oven has cooled enough to open door “LOCK” light no longer displays and door can be opened.
Interrupt Self-Clean Cycle
1.Press OVEN CANCEL pad.
2.When oven has cooled to a safe temperature, door will unlock and can be opened.
Child Lock Out
This feature disables oven control. Surface elements will heat when child lock out is on.
1.Press and hold BAKE and CLOCK pad for approximately 5 seconds.
• “OFF” displays.
2.Repeat step 1 to cancel child lock.
Service Tones
Electronic range control is equipped with a self diagnostic system. Self diagnostic system will alert you if there is a error or problem in the control. If electronic range control sounds a series of short, rapid beeps for over 16 seconds and display shows a
Code | Description |
F1 | Sticking pad or button. |
F2 | High oven temperature. |
F3 | Temperature sensor. |
F4 | Temperature sensor. |
F5 | ERC system. |
F6 | Power supply fluctuating. |
F7 | Door lock (door locked). |
F9 | Door lock (door unlocked). |
DOOR | Latch switch. |
LOCK | Latch switch. |
16
