Dual Radiant Element
Dual Element can be operated using inner element only or both elements.
To use inner element
1.Depress Element Size switch downward. Dual Element switch is located in upper right corner of control panel. (Figure 8)
LARGE
SMALL
Figure 8
2.Push in and turn surface element control to desired setting. (Figure 9)
•Element will cycle on and off to maintain desired heat setting.
Halogen Element (ARH6710)
Halogen element is able to provide constant non cycling power. LO setting allows excellent simmer and keep warm capabilities.
1. Push in and turn control knob to the desired setting.
(Figure 11)
•LO through 3 should be used for food that is prepared at less than boiling temperatures or to simmer. When using settings LO through 3 the element will not be illuminated.
•4 through 5 can be used to maintain boiling in moderate amounts of liquid.
•6 through 7 should be used to maintain boiling or larger amounts of food, low temperature frying and to maintain correct pressure in a pressure cooker.
•7 through 9 can be used to fry meat and poultry or to maintain
•HI should be used to bring food to boiling temperatures. When food is boiling temperature should be reduced to 4,5,6,7.
| OFF |
|
|
LO | HI |
| OFF |
|
| LO | HI |
|
|
|
MED
MED
Surface element control knobs
9
8
HI
7
OFF
6
5
LO
4
2
3
Figure 9
3. When finished cooking turn control to OFF position.
To use both inner and outer element
1. Depress Element Size switch upward. (Figure 10)
LARGE
SMALL
Figure 10
2. Follow steps
Figure 11
2. When finished cooking, turn control to OFF position.
10
