Installation
STEP 6: ATTACH THE OVEN TO THE WALL
L | _1= WARNING |
You will need two people to lift this microwave. Failure to use more than one person could result in personal injury.
1.Carefully lift microwave oven and hang it on support tabs (See Figure 28 at the bottom of the mounting plate. Reaching through upper cabinet, thread power supply cord through the power supply cord hole in the bottom of the upper cabinet.
See Figure 32.
2.Rotate the microwave upward so the top of oven is against the bottom of the upper cabinet or cabinet frame.
3.Drop the lock pin and washer assembly into hole N (left side hole) and push the pin down as far as it will go. See Figure 33.
4.Place washers over two 1/4"x3" bolts. Then insert a bolt down through each hole in the upper cabinet bottom. Tighten the bolts until the gap between the upper cabinet and microwave oven is closed. See Figure 34.
5.Remove the lock pin and washer.
If
Figure 32
Figure 33
Figure 34
