Installation
PARTS, TOOLS, MATERIALS
THE FOLLOWING PARTS ARE SUPPLIED WITH THE OVEN:
NOTE: Dependingon yourventilationrequirements,you may not use all of these parts,
Backdraft damper / duct connector
(for
One power cord clamp and
One
(to hold the power cord)r" Actual Size
Two self - tapping screws - Actual Size (for attaching the damper duct connector)n
I One lock pin and one
One power cord clamp bushing - Actual Sized (for the cord hole in a metal upper cabinet)
Four 1/4" x 2" lag screws - Actual Sized | Four 1/4" x 3" toggle | bolts - Actual SizeO |
(for wall stud holes) | (for drywall | holes) |
| ||
_ | }liii}llliiliililin niliilJillliilillliniillinlllnllnilllillnllllllllliliillllillit) |
Two 1/4" x 2" or 3" bolts - Actual Sized (for securing to the upper cabinet)
- ))i)IIJIIIII}IilIilIIItlIIIIIIIIUIIIIIIIIIIIIIlIIUI)IIIlIII}_IIU
Two washers - Actual Sizen
(for the two upper cabinet bolts)
Four spring toggle heads - Actual Sized
(for the toggle bolts)
NOTE: You need to install at least 2 lag screws into one 2" x 4" stud and four anchor bolts into the wall. The mounting area must meet the 150 Ibs. weight requirement.
- 34 -