Installation
YOUR SAFETY FIRST
Read this entire manual before you begin.
BEFORE YOU START
•Proper installation is the instaUer'sresponsibility!
-Write the model& serialnumberson the owner'smanual,The modelnumber labelis locatedon the oven front,
The mountingplate is locatedon the backside of the microwaveoven. See Figure1.
BE SURE TO READ THE FOLLOWING SAFETY INSTRUCTIONS:
Mounting J plate
( Remove from oven to install. )
Figure I
WARNING]
FOR YOUR SAFETY:
•You will need TWO people to install this oven. It is heavy and could cause personal injury if not handled properly.
•Avoid Electrical Shock!
-Before you drill into the wall, note where electrical outlets are and where electrical wires might be concealed behind the wall. YOU COULD GET AN ELECTRIC SHOCK if you contact electrical wires
with your drill bit.
-Locate and disconnect the power to any electrical circuits that could be affected by installing this oven.
IF YOU DO NOT DISCONNECT THE POWER, YOU COULD GET AN ELECTRIC SHOCK.
-You need a DEDICATED 120V, 60Hz, AC only, 15 or 20A, fused electrical supply (located in the cabinet above the microwave as close as possible to the microwave) serving only the microwave.