6. Counterweight (27):
Locate and remove the tonearm Counterweight (27) from the packaging. Slide Counterweight (27) onto the rear of the Tonearm (21). Turn it lightly and it will screw onto the rear shaft of the tonearm.
Turntable Connections:
1.Connect the unit's stereo output leads to a receiver or mixer. The red phono terminal represents the right output channel and the white terminal represents the left output channel.
2.The thin black wire with a spade connector is the ground lead. The ground lead must be connect to the mixer (receiver) to avoid pops and clicks associated with magnetic
Output Leads | Mixer (Receiver) | |
L (White) | > | L Channel |
R (Red) | > | R Channel |
GND | > | Ground |
3.Connect the power core to matching outlet for your area. Only connect the power cord after the all other connections have been made.
NOTE: Be sure to connect the ground terminals firmly to the Mixer or receiver.
Phono ground lead |
Stereo phono lead |
Phono ground lead |
Stereo phono lead
|
| AMERICAN AUDIO® |
|
©American Audio® | - | www.americandj.com | - |
AMERICAN AUDIO® |
Power Drive 2.2™ Instruction Manual Page 11
