American Dryer Corp ML-410 manual MLG-410 1 Door/Forward Tilt With Sprinkler

e.Secure the 28-inch (71.12 cm) diameter exhaust duct transition piece to the dryers’ rectangular exhaust duct with the 1/4-20 self-tapping screws (supplied with the dryer).

The exhaust duct exits from the rear of the base.

f.On dryers equipped with automatic (piston operated) load doors, reconnect the two (2) poly-flo air lines that run from the dryer base up to the door pistons.

g.On dryers equipped with a sprinkler option, a separate power supply must be connected to the sprinkler circuit located in the right base electrical box.

1)The optional sprinkler water connection is located in the left side of the dryer base. A 1-inch M.P.T. water supply line will be connected to the 1-inch F.P.T. pipe connection of the dryer.

MLG-410 1 Door/Forward Tilt

with Sprinkler

TILTING PISTON RECONNECTION VIEW TILTING POST RECONNECTION VIEW

MAN3507 MAN2771

TILT GUARD RECONNECTION VIEW GAS FLEX HOSE RECONNECTION VIEW

MAN2247 MAN3506

26