58 Installation and Operation Guide
Change the Application Setting — Alarm Application Enable Setting.
Please follow the steps below to change the setting via the network as necessary.
1. Click on the Enable Alarm button on the left side of the record to enter the “Alarm Application
Enable Setting” page.
MJPEG mode MPEG4 mode
2. Click “Enable Alarm – Trigger an Alarm When Ethernet Is Lost” to checkmark the box and
activate the function.
3. Click “Enable Alarm – Upload Via FTP” to checkmark the box and activate the function (*FTP
function is for PAL version only).
4. Click “Enable Alarm – Save Into SD card” to checkmark the box and activate the function.
5. Click “Enable Alarm – Upload Via SMTP” to checkmark the box and activate the function
(*SMTP function is for PAL version only).
6. Enter the "Alarm Duration" you have chosen.
7. Click on the Submit button to submit the new setting of the recording.
8. Click on the Home button to return to the home page.
Description of function keys:
Enable ALARM – Trigger an Alarm When
Ethernet Is Lost:
Activates or deactivates the alarm triggering while
the Ethernet lost.
Enable Alarm – Upload Via FTP: Activates or deactivates the alarm recording
upload to the FTP.
Enable Alarm – Save Into SD card: Activates or deactivates the alarm recording to be
saved to the SD card.
Enable Alarm – Upload Via SMTP: Activates or deactivates the alarm recording
upload to the SMTP.
Alarm Duration: Predetermines the length of the alarm.