8 Installation and Operation Guide
2. DESCRIPTION OF THE FRONT/REAR VIEW
2.1 The Front View
1. SD CARD slot:
This is used for system software updating and archiving / accessing critical images.
2. RESET:
Recover to factory default.
3. 5pin MINI USB Port:
You can use a USB device cable to connect the IP camera to the USB port on the PC.
4. GPIO:
This is an 8-PIN connector including the RS485+/-, ALARM IN/OUT, ALARM RESET,
AUDIO IN/OUT and GROUND items for connecting with external devices.
RESET USB 12345678 VIDEO ETHERNET
(PoE) AC24V
-DC12V+
SD
123 4 5 6 7