SYSTEM CONFIGURATIONS
LEVEL 2 - 1024 X 32, Nine Bay System
A nine bay, Level 2 system allows a maximum of 1024 video
inputs switched to a maximum 32 video outputs. Bays one
through eight each consists of 256 video inputs, and bay nine
consists of the first 32 video outputs.
From the rear of bay one, the modules are installed at the
factory in the following manner; the far right module is the
2010PS, the next module is the 2010DB-11 with 16 BNCs for
connection to the 2024VOM-1 modules in bay nine, followed
by sixteen 2016AVIM-2 modules, inputs 1 - 256.
From the rear of bay two, the modules are installed at the
factory in the following manner; the far right module is the
2010PS, the next module is the 2010DB-21 with 16 BNCs for
connection to the 2024VOM-1 modules in bay nine, followed
by sixteen 2016AVIM-2 modules, inputs 257 - 512.
From the rear of bay three, the modules are installed at the
factory in the following manner; the far right module is the
2010PS, the next module is the 2010DB-31 with 16 BNCs for
connection to the 2024VOM-1 modules in bay nine, followed
by sixteen 2016AVIM-2 modules, inputs 513 - 768.
From the rear of bay four, the modules are installed at the
factory in the following manner; the far right module is the
2010PS, the next module is the 2010DB-41 with 16 BNCs for
connection to the 2024VOM-1 modules in bay nine, followed
by sixteen 2016AVIM-2 modules, inputs 769 - 1024.
From the rear of bay five, the modules are installed at the
factory in the following manner; the far right module is the
2010PS, the next module is the 2010DB-12 with 16 BNCs for
connection to the 2024VOM-1 modules in bay nine, followed
by sixteen 2016AVIM-3 modules, inputs 1 - 256.
From the rear of bay six, the modules are installed at the
factory in the following manner; the far right module is the
2010PS, the next module is the 2010DB-22 with 16 BNCs for
connection to the 2024VOM-1 modules in bay nine, followed
by sixteen 2016AVIM-3 modules, inputs 257 - 512.
From the rear of bay seven, the modules are installed at the
factory in the following manner; the far right module is the
2010PS, the next module is the 2010DB-32 with 16 BNCs for
connection to the 2024VOM-1 modules in bay nine, followed
by sixteen 2016AVIM-3 modules, inputs 513 - 768.
From the rear of bay eight, the modules are installed at the
factory in the following manner; the far right module is the
2010PS, the next module is the 2010DB-42 with 16 BNCs for
connection to the 2024VOM-1 modules in bay nine, followed
by sixteen 2016AVIM-3 modules, inputs 769-1024.
From the rear of bay nine, the modules are installed at the
factory in the following manner; the far right module is the
2010PS, the next module is the 2010DB-00, followed by eight
2024VOM-2 modules, installed left to right, for outputs 1 - 32.
Smaller matrices such as those ordered with future expansion
in mind, may have fewer modules installed.
IDENTIFY THESE MODULES CAREFULLY
BEFORE PROCEEDING.
Data Interconnect: See LEVEL 2 - 192 X 32, Two Bay
System and connect all bays in a similar manner.
Video Interconnections: The 16 video outputs from bay 1,
bay 2, bay 3 and bay 5, bay 6, and bay 7 located on the rear
panel of the 2010DB-11, 2010DB-12 , 2010DB-21,
2010DB-22 , 2010DB-31, and 2010DB-32 are
grouped by fours and identified by their icons.
Each 2024VOM-2 is similarly grouped with four sections of
four BNCs, with identifying icons. A fifth section of four
BNCs, in the lower left corner, is used for video outputs. The
left most 2024VOM-2 module is assigned to outputs 1 - 4, the
next for outputs 5 - 8, etc. See Figure 22, Video Output
Module, page 9.
Using high grade RG-59U video cables, connect the topmost
BNC from bay 1 on the 2010DB-11 panel, numbered 1, to the
2024VOM-2 in bay 9, for output 1, matching icon to icon .
Continue in this manner until connections 1-4 of the 2010DB-
11 panel are connected to inputs 1-4 of the first 2024VOM-2.
Proceed to the next group of four BNCs on the 2010DB-11 and
connect these to the second 2024VOM-2 for outputs 5-8.
Continue in this manner until all 16 connections of the
2010DB-11 panel are connected to the 2024VOM-2 modules
for outputs 1 - 16.
Connect bay 5 in a similar manner to the 2024VOM-2 modules
of bay 9 for video outputs 17 - 32, matching icon to icon.
Connect the top most BNC from bay 2 on the 2010DB-21
panel, numbered 1, to the 2024VOM-2 in bay 9, for output 1,
matching icon to icon.
Continue in this manner until connections 1-4 of the 2010DB-
21 panel are connected to inputs 1-4 of the 2024VOM-2.
Proceed to the next group of four BNCs on the 2010DB-21 and
connect these to the second 2024VOM-2 for outputs 5-8.
Continue in this manner until all 16 connections of the
2010DB-21 panel are connected to the 2024VOM-2 modules
for outputs 1-16.
Connect bay 6 in a similar manner to the 2024VOM-2 modules
of bay 9 for video outputs 17-32, matching icon to icon.
34