Unused video inputs do not require any external connection or
termination, and may be left open.
Video Output Connections: Each 2024VOM-1 has a rear
panel with 16 BNCs. The bottom four BNCs are used for
video output connections. The left-most module is assigned to
outputs 1-4, the next for outputs 5-7, etc. Connect the video
outputs to any device that accepts standard video such as
monitors or video recorders. Bay one contains the 2024VOMs
for outputs 1-16, bay two for outputs 17-32 and bay three for
outputs 33-48.
In the Appendix, see Figure A12, 192 X48, Three Bay System.
LEVEL 3 - 256 X 48, Four Bay System
A four bay, Level 3 system allows a maximum of 256 video
inputs switched to a maximum 48 video outputs. Bays one
through three consists of 256 video inputs, and bay four
consists of 48 video outputs.
From the rear of bay one, the modules are installed at the
factory in the following manner; the far right module is the
2010PS, the next module is the 2010DB-11 with 16 BNCs for
connection to the 2024VOM-1 modules in bay four, followed
by sixteen 2016AVIM-2 modules, inputs 1-256.
From the rear of bay two, the modules are installed at the
factory in the following manner; the far right module is the
2010PS, the next module is the 2010DB-12 with 16 BNCs for
connection to the 2024VOM-1 modules in bay four, followed
by sixteen 2016AVIM-3 modules, inputs 1-256.
From the rear of bay three, the modules are installed at the
factory in the following manner; the far right module is the
2010PS, the next module is the 2010DB-13 with 16 BNCs for
connection to the 2024VOM-1 modules in bay four, followed
by sixteen 2016AVIM-4 modules, inputs 1-256.
From the rear of bay four, the modules are installed at the
factory in the following manner; the far right module is the
2010PS, the next module is the 2010DB-00, followed by
twelve 2024VOM-1 modules, installed left to right, for outputs
1-48.
Smaller matrices such as those ordered with future expansion
in mind, may have fewer modules installed.
IDENTIFY THESE MODULES CAREFULLY
BEFORE PROCEEDING.
Data Interconnect: See LEVEL 3 - 192 X 48, Three Bay
System and connect all bays in a similar manner.
Video Interconnections: The 16 video outputs from bay 1,
bay 2, and bay 3 located on the rear panel of the 2010DB-11, -
12 and -13 respectively, are grouped by fours and identified by
the icon.
Each 2024VOM-1 is similarly grouped with three sections of
four BNCs, with identifying icons. A fourth section of four
BNCs is used for video output connections. The left-most
2024VOM-1 module is assigned to outputs 1-4, the next for
outputs 5-8, etc. See Figure 21, Video Output Module, page 9.
Using high grade RG-59U video cables, connect the topmost
BNC from bay 1 on the 2010DB-11 panel, numbered 1, to the
2024VOM-1 in bay 4, for output 1, matching icon to icon .
Continue in this manner until connections 1-4 of the 2010DB-
11 panel are connected to inputs 1-4 of the first 2024VOM-1.
Proceed to the next group of four BNCs on the 2010DB-11 of
the first bay and connect these four to the second 2024VOM-1
for outputs 5-8. Continue in this manner until all 16
connections of the 2010DB-11 panel are connected to the
2024VOM-1s for outputs 1 - 16.
Connect the topmost BNC from bay 2 on the 2010DB-12
panel, numbered 17, to the 2024VOM-1 in bay 4, for output
17, matching icon to icon . Continue in this manner until
connections 17 - 20 of the 2010DB-12 panel are connected to
inputs 17 - 20 of the fifth 2024VOM-1. Proceed to the next
group of four BNCs on the 2010DB-12 of the second bay and
connect these four to the sixth 2024VOM-1 for outputs 21-24.
Continue in this manner until all 16 connections of the
2010DB-12 panel are connected to the 2024VOM-1s for
outputs 17 - 32.
Connect the topmost BNC from bay 3 on the 2010DB-13
panel, numbered 33, to the 2024VOM-1 in bay 4, for output
33, matching icon to icon . Continue in this manner until
connections 33 - 36 of the 2010DB-13 panel are connected to
inputs 33 - 36 of the ninth 2024VOM-1. Proceed to the next
group of four BNCs on the 2010DB-13 of the third bay and
connect these four to the tenth 2024VOM-1 for outputs 37 -
40. Continue in this manner until all 16 connections of the
2010DB-13 panel are connected to the 2024VOM-1s for
outputs 33 - 48.
See Appendix Figure A18, Video Interconnections, for
illustration of these connections.
If there are less than twelve 2024VOM-1s in the system the
remaining BNCs on the 2010DB-XX do not require any
connection.
Video Input Connections: See LEVEL 3 - 192 X 48, Three
Bay System and connect all bays in a similar manner.
Video Output Connections: See LEVEL 3 - 192 X 48, Three
Bay System and connect all bays in a similar manner.
In the Appendix, see Figure A13, 256 X 48, Four Bay System.
SYSTEM CONFIGURATIONS
37