5.Use the joystick to move the highlight to Presets. Press Set to select. The Select Preset to Program screen displays.

Specifications-Indoor Dome

SELECT PRESET TO PROGRAM

PRESET

 

NUMBER

PRESET NAME

 

 

PRESET 1-96

1-96

 

FOCUS FAR to program preset

EXIT

6.Use the joystick to select the Preset you want to program. If the Preset has been programmed the dome automatically moves to that position.

Move the joystick right to increase the preset number.

Move the joystick left to decrease the preset number.

When the correct Preset number appears, press Set to begin programming.

7.The Presets screen displays. Use the joystick to adjust the dome to the correct pan/tilt position.

PRESETS

PRESET X

Position camera with PAN

TILT, ZOOM and IRIS

FOCUS FAR to save and exit

EXIT

Operational

Pan/Tilt:

 

Manual Pan Speed.........................

0.2°-100° per second

 

(scaled to zoom position)

Manual Tilt Speed ........................

0.25°-100° per second

 

(scaled to zoom position)

Preset Pan/Tilt Speed ............

220° per second maximum

Pan Travel..................................

360° continuous rotation

Tilt Travel ..................................................................

>90°

Pan/Tilt Accuracy .....................................................

±0.5°

22X Camera Zoom Functions:

Optical Zoom..............................................................

22X

Digital Zoom...............................................................

11X

Zoom Pause.........................................

22X selectable or

 

33X default

Total Zoom...............................................................

242X

Maximum Zoom Stop .......

44X, 66X, 88X (default), 110X,

132X, 154X, 176X, 198X, 220X, 242X

Zoom/Focus Accuracy ...........................................

±0.5%

23x Day/Night Camera Zoom Functions:

Optical Zoom..............................................................

23X

Digital Zoom...............................................................

10X

Zoom Pause.........................................

23X selectable or

 

35X default

Total Zoom...............................................................

230X

Maximum Zoom Stop .......

46X, 69X, 92X (default), 115X,

 

138X, 161X, 184X, 207X, 230X

Zoom/Focus Accuracy ...........................................

±0.5%

Auto Synchronization:

 

Line Locked.........................

Remote V-phase adjustment

Internal ..........................................

Built-in sync generator

IMPORTANT! If using the WV-CU550A Controller with the WJ-SX550 Multiplexer, you must press F3 (A. Res) to adjust the zoom, focus, or iris settings. This places the controller in normal navigating mode. Make the necessary adjustments. When finished, press F1 (On) to resume menu mode.

8.Press Set to save the Preset information.

9.To program more Presets, repeat steps 5 through 8. To exit the Dome Configuration Menu and save changes, press F4 (Exit).

To verify the Preset programming, enter a Preset number (1-64) and press Preset.

Address Range .......................................................

1-255

Number of Presets:

VM16 / ADTT16 ...........................

96 with SensorNet 485

VM32 / AD32................................

96 with SensorNet 485

AD2150 .............................................

64 with Manchester

 

16 with RS422 (using AD2083-02A)

VM96......................

Virtual with RS422 or SensorNet 485

VM168 / AD168................................

64 with Manchester,

 

RS-422 or SensorNet

 

16 with RS422 (using AD2083-02A)

AD2050 .............................................

64 with Manchester

 

16 with RS422 (using AD2083-02A)

SPEEDDOME ULTRA VII CAMERA DOME CONFIGURATION UTILITY

8200-0184-09, REV. A

OPERATOR’S MANUAL SUPPLEMENT

10 of 13