Command

Function

(Zoom In) or

Move the cursor to the right of

the current character in the

Twist joystick

name or password.

clockwise

 

(Zoom Out)

Move the cursor to the left of

the current character in the

or Twist joystick

name.

counterclockwise

 

Additional Dome Commands

Table 5 provides the special commands available when using the dome in an AD-UTC network. These commands are available when you enter the keyboard combination provided.

Table 5: Additional Dome Commands

Command

Function

F

(Function),

Program selected Preset

 

 

Preset # (1-96), and

 

then

(Preset)

 

Preset # (1-96), and

Recall selected Preset

then

(Preset)

 

F

(Function),

Start selected Pattern

 

programming

pattern # (1-3), and

 

then

+

 

(Shift+Preset)

 

Pattern # (1-3), and

Save Pattern programming

then

F (Function)

 

Pattern # (1-3), and

Run selected Pattern

then

+

continuously

 

(Shift and Preset)

 

F

+

Resume Auto Focus mode

 

 

 

(Function+Focus Far)

 

Or

F+

(Function+Focus

Near)

F

+

Resume Auto Iris mode

 

 

 

(Function+Iris Open)

 

Or

F+ (Function+Iris Close)

(Flip)

Rotate dome 180° from current

position (“flip”)

 

Performance Notes

Keep the following considerations in mind when using the SpeedDome Ultra VII camera dome in the AD-UTC environment.

Address Setting

The SpeedDome Ultra VII camera dome must be set to address 891 to operate in the AD-UTC environment. When the dome initializes or resets, the address and protocol information (UTC_T) appear on-screen.

Accessing the Quick Set Menu

The Quick Set Menu provides easy access to specific SpeedDome Ultra VII functions from the keyboard. To access the Quick Set menu, select

the dome, and press (Quick Set button).

See Quick Set Menu on page 2 for information about the Quick Set functions.

SensorNet and RS-422

Matrix Switchers and

Controllers

The following provides information about SensorNet and RS-422 controllers compatible with SpeedDome Ultra VII. Specific operating considerations are also included.

VM8

Supported Protocol

SensorNet

Maximum Presets

0

Maximum Patterns (1)

1

Quick Set Menu

Not supported

Address Range

1-8

Notes:

(1)Apple Peel only. Programmable patterns are not available.

SPEEDDOME ULTRA VII CAMERA DOME CONFIGURATION UTILITY OPERATOR’S MANUAL SUPPLEMENT

8200-0184-09, REV. A

6 of 13