Command | Description |
14+Quick Set* | WDR Off: Disables Wide |
| Dynamic Range (WDR). Use this |
| setting when the light level is |
| constant or changes in lighting |
| conditions are gradual. |
15+Quick Set | Smooth Scan: Initiates a smooth |
| scan between the left and right |
| scan limits, starting at the left |
| scan limit. If no scan limits have |
| been set, initiates a smooth 360° |
| clockwise rotation around the |
| dome axis using the current tilt, |
| zoom and focus settings. |
16+Quick Set | Stepped Scan: Initiates a scan |
| between the left and right scan |
| limits pausing briefly every 10° (at |
| 1x zoom), starting at the left scan |
| limit. When the right scan limit is |
| reached, the scan is reversed. If |
| no scan limits have been set, |
| initiates a clockwise rotation |
| around the dome axis pausing |
| briefly every 10° (at 1x zoom) for |
| 3 seconds using the current tilt, |
| zoom and focus settings. |
17+Quick Set | Random Scan: Initiates a scan |
| between the left and right scan |
| limits pausing randomly between |
| the limits. If no scan limits have |
| been set, initiates a clockwise or |
| |
| the dome axis using the current |
| tilt, zoom and focus settings. The |
| dome pauses randomly as it |
| rotates around the axis. |
20+Quick Set | Dome Information: Displays the |
| Dome Information screen |
| available through the dome |
| configuration menu. |
Refer to your controller manual to determine if the Quick Set Menu feature is supported. For more information about these settings, see your SpeedDome Ultra VII Configuration Utility Operator’s Manual. See also:
Topic | Page |
|
|
|
|
|
|
|
Auto Iris/Auto Focus
Resume Setting
Normally, the camera’s iris and focus settings return to automatic mode when the dome moves a minimum of one frame from its current pointing position. In some situations, you may want to maintain specific iris and/or focus adjustments based upon your surveillance needs.
Use the I/F Return to Auto setting on the Pan/Tilt/Zoom/Sync Opts menu to configure the auto iris and auto focus resume settings.
Figure 3: Pan/Tilt/Zoom/Sync Options menu
PROPORTIONAL FLIP | OFF/ON |
|
1ST ZOOM STOP X | 33/22 |
|
MAX TOTAL ZOOM X | 44...242 | |
LINE LOCK | ON/OFF | |
FREEZE FRAME | OFF/ON | |
I/F RETURN TO AUTO | OFF/ON/ | |
| IRIS/FOCUS | |
Four settings are available: On, Off, Iris and Focus.
Setting | Description |
On | Both return to auto iris and return to |
| auto focus settings are enabled. |
| Moving the dome resumes auto mode |
| for both iris and focus changes. |
Off | Both return to auto iris and return to |
| auto focus settings are disabled. |
| Moving the dome does not resume |
| auto mode for iris and focus changes. |
Iris | Only return to auto iris is enabled. |
| Return to auto focus is disabled. |
| Moving the dome resumes auto iris |
| mode without changing focus settings. |
Focus | Only return to auto focus is |
| enabled. Return to auto iris is |
| disabled. Moving the dome resumes |
| auto focus mode without changing iris |
| settings. |
Continue with Changing the Auto Iris/Auto Focus Resume Setting on page 4 to configure the setting.
SPEEDDOME ULTRA VII CAMERA DOME CONFIGURATION UTILITY OPERATOR’S MANUAL SUPPLEMENT
3 of 13