VM16/ADTT16 (White Touch Tracker)
Supported Protocol | SensorNet |
| |
Maximum Presets | 96 – SensorNet |
| 4 – |
Maximum Patterns (2) | 3 |
Quick Set Menu | Not supported |
Address Range |
Notes:
(1)Requires RCSN422 code converter.
(2)Patterns are limited by time and the number of available dome commands. Total time for each pattern cannot exceed 6 minutes 50 seconds.
Total dome commands used in all patterns cannot exceed 99.
VM16E/ADTT16E (Black Touch Tracker)
Supported Protocol | SensorNet |
| |
|
|
Maximum Presets | 96 – SensorNet |
| 4 – |
|
|
Maximum Patterns (2) | 3 |
|
|
Quick Set Menu | Yes (3) |
|
|
Address Range | |
|
Notes:
(1)Requires RCSN422 code converter.
(2)Patterns are limited by time and the number of available dome commands. Total time for each pattern cannot exceed 6 minutes 50 seconds.
Total dome commands used in all patterns cannot exceed 99.
(3)Requires firmware version
VM32/AD32
Supported Protocol | SensorNet |
| |
|
|
Maximum Presets | 96 – SensorNet |
| 4 – |
Maximum Patterns (2) | 3 |
Quick Set Menu | Not supported |
Address Range |
Notes:
(1)Requires RCSN422 code converter.
(2)Patterns are limited by time and the number of available dome commands. Total time for each pattern cannot exceed 6 minutes 50 seconds.
Total dome commands used in all patterns cannot exceed 99.
VM96 (1)
Supported Protocol | SensorNet |
| |
|
|
Maximum Presets | Unlimited (2) |
|
|
Maximum Patterns (3) | 3 |
|
|
Quick Set Menu | Not supported |
|
|
Address Range | |
|
|
Notes:
(1)Requires software version 5.2 or newer.
(2)Preset information is stored at the host, not the dome.
(3)Patterns are limited by time and the number of available dome commands. Total time for each pattern cannot exceed 6 minutes 50 seconds.
Total dome commands used in all patterns cannot exceed 99.
SPEEDDOME ULTRA VII CAMERA DOME CONFIGURATION UTILITY OPERATOR’S MANUAL SUPPLEMENT
7 of 13