Setting Names / Working with Passwords
When setting names or entering password information, the screen displays the available characters in the selected languages. In these situations, the following commands are used:
| If you want to … |
|
| Use … |
|
|
|
|
| ||
Move the highlight left or right in the character field. |
|
| Pan Left/Right |
| |
Move the highlight up or down in the character field. |
|
| Tilt Up/Down |
| |
Select the highlighted character in the character field. |
|
| A/P |
| |
|
|
|
|
| |
Move the cursor to the right of the current character |
|
| Pan Right (or Zoom In) |
| |
in the name or password. |
|
|
|
| |
Move the cursor to the left of the current character in |
|
| Pan Left (or Zoom Out) |
| |
the name. |
|
|
|
| |
Setting Left and Right Auto Pan Scan Limits
I M P O R T A N T
You must program the Left Scan Limit setting before programming the Right Scan Limit setting. This procedure erases any previously programmed Right Scan Limit setting.
Programming the Scan Limits:
1.Select the camera number assigned to the SpeedDome Ultra VII dome.
2.Use the pan/tilt joystick to position the dome’s pointing direction to the Left Scan Limit.
3.Set Run/Pgm switch to Pgm.
4.Enter Set Preset 98 to save the setting.
5.Position the dome’s pointing direction, by panning right to Right Scan Limit.
6.Enter Set Preset 99 to save the setting.
7.Set Run/Pgm switch to Run.
Note: If both the Left and Right scan limits are set to the same position, the dome continuously pans to the right when Auto Pan is activated.
SpeedDome Ultra VII Day/Night Operator's Manual |