Deleting Specific Privacy Zones
To delete individual Privacy Zones, use the following procedure. To delete all Privacy Zones, see Deleting All Privacy Zones on page
1.Select Alarms/Areas/Home/Presets/PZ from the Dome Configuration Menu.
2.Select Privacy Zones.
The Program Privacy Zones screen displays.
3.Select Delete Specific Zones.
4.Position the arrows in the Privacy Zone that you want to delete. Press Zoom to delete. If you do not want to delete the zone, press Focus.
5.Repeat steps 3 and 4 for each Privacy Zone you want to delete. When finished, select Exit.
6.When the Alarms/Areas/Home/Presets/PZ screen appears, select Exit. The Dome Configuration Menu appears. Continue with What To Do Next on page
Deleting All Privacy Zones
To delete all Privacy Zones, use the following procedure. To delete individual Privacy Zones, see Deleting Specific Privacy Zones on page
1.Select Alarms/Areas/Home/Presets/PZ from the Dome Configuration Menu.
2.Select Privacy Zones. The Program Privacy Zones screen displays.
3.Select Delete All Zones.
4.The following prompt appears
You are about to delete
All Privacy Zones
Cancel
Continue
5.To delete all Privacy Zones, select Continue.
If you do not want to delete all Privacy Zones, select Cancel. The Program Privacy Zones screen displays.
6.Select Exit to return to Alarms/Areas/Home/Presets/PZ screen.
7.When the Alarms/Areas/Home/Presets/PZ screen appears, select Exit. The Dome Configuration Menu appears. Continue with What To Do Next on page
Hiding Privacy Zones
If you want to temporarily disable the appearance of Privacy Zones, you may “hide” them. This allows you to keep the Privacy Zones that have been programmed while disabling their appearance
To hide all Privacy Zones:
1.Select Alarms/Areas/Home/Presets/PZ from the Dome Configuration Menu.
2.Select Privacy Zones.
The Program Privacy Zones screen displays.
3.Select Hide All Zones. Change the setting.
•Select Yes to hide all Privacy Zones.
•Select No to make all Privacy Zones active.
The default setting is No.
4.Select Exit to return to Alarms/Areas/Home/Presets/PZ screen.
5.When the Alarms/Areas/Home/Presets/PZ screen appears, select Exit. The Dome Configuration Menu appears. Continue with What To Do Next on page
Configuring Alarms, Areas, Home, Privacy Settings, Presets and Scan Limits |