Enabling or Disabling Password Protection

Password protection must be enabled before passwords can be used. To enable or disable the dome password:

1.Select Language/Password from the Dome Configuration Menu.

2.Move the highlight bar to Password Protection.

3.Change the setting.

•Select On to enable password protection.

•Select Off to disable password protection.

The default setting is Off.

4.Select Exit. The Dome Configuration Menu appears. Continue with What To Do Next on page 6–4.

Tip: Instructions for entering the dome password are found in Chapter 1.

What To Do Next

When you select Exit from the Language / Password screen, the Dome Configuration Menu appears.

 

DOME CONFIGURATION MENU

 

Chapter 2

PAN/TILT/ZOOM/SYNC OPTS

 

Chapter 3

CAMERA FUNCTIONS

 

Chapter 4

ALARMS/AREAS/PRESETS/PZ

 

Chapter 5

ON-SCREEN TEXT DISPLAY

 

Chapter 6

LANGUAGE / PASSWORD

 

Chapter 7

DOME INFORMATION

 

 

RESET TO FACTORY SETTINGS

Chapter 1

 

QUIT WITHOUT SAVING

 

EXIT AND SAVE CHANGES

 

From this screen you can:

•Select an option to make additional changes.

•Restore all settings to the factory defaults.

•Exit the utility without saving changes.

•Save the changes and exit the utility.

Move the highlight bar to an item and select it. Refer to the related chapter for additional information.

6–4

SpeedDome Ultra VII Day/Night Operator's Manual