Displaying or Hiding All Name Information

The dome provides the ability to display the dome name, the area where the dome is pointing, the name of the preset or pattern that is running, and alarm names. When the display of camera or area names is enabled, the information appears on the screen continuously. Preset, pattern, and alarm names appear only while they are active.

Figure 5–2: Display Locations for Name Information

CAMERA NAME

PRESET NAME/PATTERN NAME

ALARM NAME

AREA NAME

You may choose to disable displaying all name information, or you may choose to display selected or all name information.

Changing the Display of All Name Information

1.Select On-Screen Text Display from the Dome Configuration Menu.

2.Move the highlight to Disable All Names?

3.Change the setting.

•Select Yes to disable the appearance of all name information.

•Select No to enable the appearance of all or some name information. Then continue with Configuring the Display of Name Information on page 5–6.

The default setting is No.

4.Select Exit. The Dome Configuration Menu appears. Continue with What To Do Next on page 5–11.

Configuring Text Displayed On-Screen

5–3