Exiting the Configuration Utility

Under SensorNet, RS-422, and Manchester protocols, you may save your changes and exit the utility from any screen by pressing and holding Iris Close, then pressing Focus. From the Dome Configuration Menu, you have two choices for exiting the utility: Exit and Save Changes or Quit Without Saving. Use the Pan/Tilt control to move the highlight bar up and down on the screen.

•If you want to keep the changes you made, move the highlight bar to Exit and Save Changes, and select. The utility closes.

•If you want to exit without making changes, move the highlight bar to Quit Without Saving, and select. The following prompt appears on the screen:

Data Not Saved. Quit Anyway?

No

Press Zoom to display the options.

•To cancel the changes, select Yes.

•To keep the changes, select No. If you choose No, the Dome Configuration Menu is displayed. Press Focus to accept the displayed option.

I M P O R T A N T

The following settings do not restore when selecting Quit Without Saving from the

Dome Configuration Menu: Area Boundaries and AGC/Shutter Limit.

Accessing the Quick Set Menu

SpeedDome Ultra VII Day/Night provides a Quick Set Menu for commonly used features and functions when used with compatible controllers. This allows you to change or activate features without starting the dome configuration menu. Two pages of menu options are available.

0

TOGGLE QUICK SET MENU

15

SMOOTH

SCAN

1

DOME CONFIG MENU

16

STEPPED SCAN

2

AUTO IRIS/AUTO FOCUS

17

RANDOM

SCAN

3

FLIP

20

DOME INFORMATION

4PEEL PATTERN

10NIGHT MODE

11DAY MODE

12AUTO DAY/NIGHT MODE

13WDR ON

14WDR OFF

FOCUS FAR = next page

FOCUS NEAR = previous page

To access a feature on the menu, enter the number and press the Quick Set button (varies by controller). To display the different pages of the menu, press Focus Far or Focus Near. The following table provides a description of the available options.

Using the Dome Configuration Utility

1–5