Step 9 Attach IDE Drive, Continued
PRIMARY Pinout The PRIMARY IDE pinout is:
| Pin | Use | Pin | Use |
|
| 1 |
| 2 | GND |
|
| 3 | DATA7 | 4 | DATA8 |
|
| 5 | DATA6 | 6 | DATA9 |
|
| 7 | DATA5 | 8 | DATA10 |
|
| 9 | DATA4 | 10 | DATA11 |
|
| 11 | DATA3 | 12 | DATA12 |
|
| 13 | DATA2 | 14 | DATA13 |
|
| 15 | DATA1 | 16 | DATA14 |
|
| 17 | DATA0 | 18 | DATA15 |
|
| 19 | GND | 20 | KEY (N/C) |
|
| 21 | N/C | 22 | GND |
|
| 23 | 24 | GND |
| |
| 25 | 26 | GND |
| |
| 27 | IDERDY | 28 | ALE |
|
| 29 | N/C | 30 | GND |
|
| 31 | INT14 | 32 |
| |
| 33 | HA1 | 34 | N/C |
|
| 35 | HA0 | 36 | HA2 |
|
| 37 | 38 |
| ||
| 39 | 40 | GND |
| |
|
|
|
|
|
|
Secondary IDE Controller The secondary IDE connector is labeled SECONDARY. It connects the secondary primary and slave IDE drives to the secondary onboard IDE controller.
Attach the secondary master and slave IDE drives to IDE2 via a standard 40- pin IDE cable.
Cont’d
Chapter 1 Hardware Installation | 37 |
