Step 3 Configure CPU, Continued
Install CPU Install the CPU in the ZIF (zero insertion force) socket by performing the following steps. The CPU socket is near one edge of the motherboard.
Warning
Improper CPU installation can damage the CPU and the
motherboard. You must follow the procedures in this section exactly as documented. Make sure you wear an antistatic wristband while installing the CPU. Follow all antistatic procedures.
Step | Action |
1Lift the lever on the ZIF socket. The empty CPU socket looks like this.
2
3
Check for bent pins on the CPU. Gently straighten any bent pins with pliers. Place the CPU in the middle of the socket. Make sure that pin 1 of the CPU is aligned with pin 1 of the socket. Make sure you are properly grounded while handling the CPU.
Complete installation by lifting the ZIF lever to the other side of the socket, as shown below.
20Apollo IV PCI Pentium ISA Motherboard User’s Guide
