2:OPERATION
FRONT DISPLAY PANEL
Indicator | Description |
|
|
Online | The UPS is drawing utility power and performing double conversion to supply |
| power to connected equipment (see Troubleshooting). |
|
|
On Battery | The UPS is supplying battery power to the connected equipment. |
|
|
Bypass | The UPS is in bypass mode, sending utility power directly to connected equipment. |
| Bypass mode operation is the result of an internal UPS fault, an overload condition |
| or a user initiated command either through an accessory or the manual bypass |
| switch. Battery operation is not available while the UPS is in bypass mode (see |
| Troubleshooting). |
Fault | The UPS detects an internal fault (see Troubleshooting). |
|
|
Overload | The connected loads are drawing more power than the UPS power rating (see |
| Troubleshooting). |
|
|
Replace | The battery is disconnected or must be replaced (see Troubleshooting). |
Battery |
|
|
|
|
|
Feature | Function |
|
|
Power On | Press this button to turn on the UPS. (Read on for additional capabilities.) |
Power Off
Press this button to turn off the UPS.
7
