1-4
Isolated Noise Filter Banks
Both models eliminate electromagnetic and radio frequency interference (EMI/RFI)
that, when severe enough, can negatively impact sound and video quality. Each filter
bank is electrically isolated from each other to prevent noise generated by one
component from polluting other connected components. APC's noise filtering helps
enable your system perform to its maximum capabilities.
DC Trigger
When connected to a component acting as a DC trigger, that component controls the
turning on/off, as well as sequencing of the ‘delayed’ outlet banks. The S10 and S15
also allows that DC signal to pass through to another connected component.
Rack-mountable
Rack-mount hardware is included to mount the unit into any 4-post, 19" rack. See
below for more information.
Sequenced Turn ON/OFF
This feature ensures that connected equipment is powered-up/down in the proper
order and with the right amount of delay between the stages. It allows the user to
program a delay into the sequence between 0 and 10 seconds. This delay eliminates
transients that can affect connected components or cause the building circuit breaker
to trip.