American Power Conversion and S15BLK, S10, S10BLK, S15 SYSTEM LOAD: <XXXW; LOAD: <XXX%, , EST. RUNTIME: XHRS; FUEL: XXX%

2-10
SYSTEM LOAD: <XXXW; LOAD: <XXX%
This screen is shown in Figure 15. The S10 and S15 can also display the value (load)
of the connected equipment in watts, as well as a percentage of the total allowable
load connected to the unit. Loads less than 5% of rated load (35 watts for the S10;
45watts for the S15) will be displayed as < 5%.
Figure 15. SYSTEM LOAD: <XXXW; LOAD: <XXX% Screen
EST. RUNTIME: XHRS; FUEL: XXX%
This screen is shown in Figure 16. Each unit can also display the Estimated
Runtime (in hours), as well as the Fuel capacity of the internal battery pack (as a
percentage) based on the total load connected to the device. If the estimated runtime
is < 1 hour, the Estimated Runtime will show in minutes.
Figure 16. EST. RUNTIME: XHRS; FUEL: XXX% Screen
Note:For convenience, you can set the unit to display any of the screens as the
“default” screen. The “default” screen is the screen that the system will
revert to once the preset time has expired for other screens being