Operation
Alarm conditions | You configure warning and alarm limits through the internal menus, | ||
| using a serial port connection. | ||
| The Rack PDU shows warning and alarm conditions as follows: | ||
|
|
|
|
| Phase Indicator LED | Displays yellow for a warning and red for an |
|
|
| alarm. |
|
|
|
|
|
| Digital Display | If one phase is at or above the warning or |
|
|
| alarm limit, the display shows the current for |
|
|
| that phase. |
|
|
| If more than one phase is at or above the |
|
|
| warning or alarm limit, the display cycles |
|
|
| among those phases, displaying their current. |
|
|
|
|
|
| Control Button | Pressing this button causes the digital display |
|
|
| to display the current for the next phase for 30 |
|
|
| seconds. Then it returns to the display of the |
|
|
| current for any phases that are at or above the |
|
|
| warning or alarm limits. |
|
|
|
|
|
Do not exceed the maximum voltage and
current ratings listed on the rear panel of
Warning the Rack PDU.
12 |
