Rack PDU Configuration
How to configure | 1. Connect an available serial port on your computer to the serial port |
through a serial port | on the Rack PDU (shown below), using the supplied configuration |
connection | cable |
2.Run a terminal emulation program such as Windows® HyperTerminal.
3.Configure the following settings for the serial port:
–19,200 bps
–no parity
–8 data bits
–1 stop bit
–no flow control
| Some terminal emulation programs require that a |
| device be disconnected and then reconnected for |
Note | the new serial port settings to take effect. |
4.Press any key on the computer to display the Rack PDU login screen, which contains the username and password prompts.
5.Log on by using the user name and password for the appropriate access level:
Access Level | Default | Default Password | |
User Name | |||
|
| ||
|
|
| |
Administrator | Press | Type apc (in | |
| ENTER. | lowercase). | |
|
|
| |
User | Press | Press ESC. | |
| ENTER. |
| |
|
|
|
8 | Rack Power Distribution Unit — AP7610 |
