Operation
Rack Power Distribution Unit — AP7610 7
Rear of AP7610
Alarm conditions Configure warning and alarm limits through the internal menus, using a
serial port connection.
The Rack PDU shows warning and alarm conditions as follows:
Serial port: Access internal menus by connecting this
port (RJ-11 modular port) to a serial port on your
computer, using the supplied serial cable (part number
940-0144).
Status LED: Indicates the status of the network
connection and the state of the Rack PDU.
Ethernet port: Connects the Rack PDU to the
InfraStruXure™ network, using a CAT-5 network cable.
Link LED: Indicates whether there is activity on the
network.
Phase Indicator LED Displays yellow for a warning and red for an
alarm.
Digital display If one phase is at or above the warning or
alarm limit, the display shows the current for
that phase.
If more than one phase is at or above the
warning or alarm limit, the display cycles
among those phases, displaying their current.
Control Button Pressing this button causes the digital display
to display the current for the next phase for 30
seconds. Then it returns to the display of the
current for any phases that are at or above the
warning or alarm limits.
Warn
i
ng
Do not exceed the maximum voltage and current
ratings listed on the rear panel of the Rack PDU.