Menu Items, Outlets | American Power Conversion Master Switch

Menu Items

Outlets continued

Synchronized set Outlets that are members of a synchronization set will all execute the

configuration same control action simultaneously (within 16 milliseconds). In a configuration where multiple redundant power cords are being used in a daisy-chain configuration, this feature permits synchronized switching across units.

When you configure a synchronization set, you can assign an outlet to only one set, and all the outlets in a specified set assume the characteristics of the lowest numbered outlet. If you make changes to any of the outlets in a given set, all of the outlets will take on the new characteristics.

Item	Definition

Set Number	Identifies a specific set of outlets.

Member Outlets	Identifies the outlets assigned to a given set.

Note: In the Outlets menu, you can identify the synchronization set to

which an outlet belongs by the number in brackets. For example:

(unit #: outlet # [synchronization set #])

MasterSwitch VM User’s Guide

15

Image 20

American Power Conversion Master Switch manual Menu Items, Outlets

Contents

MasterSwitch VM Thank You MasterSwitch VM Contents Contents Warranty Information TroubleshootingSpecifications Life-Support Policy Product Description Feature DescriptionIntroduction MasterSwitch VM Controller Introduction LEDs Status Description Operating MasterSwitch VM Configuring outlets for operation Is turned on When these two delays expire, the outlet will be turned on Outlet will be turned on Outlets do not turn on when the Overload Warning Outlets always turn onThreshold has been exceeded Overload Warning and the load exceeds the Overload Warning Managing MasterSwitch VM Management Interfaces Managing MasterSwitch VM Control ConsoleInterface Telnet, for remote management Managing MasterSwitch VM Password-Protected Accounts Account access toAccount, and up to 16 Outlet User accounts Outlets and menu Menu Items Outlets Menu Items Outlets MasterSwitch VM Unit Configuration Outlet Configuration Links Dir. You will see a listing similar to the following ftpdir Event LogInterface or by pressing C TRL + L in the Control Console MasterSwitch VM unit always uses four-digit year Representation when logging and displaying event dataSimilar to the following However, you may need to select a four-digit date format Network TCP/IP Definition Snmp Access ControlTelnet/Web Snmp Trap Receiver Trap Receiver IP to Items SystemUser Manager For Outlet User Manager Outlet UserManager File Transfer IdentificationDate/Time Enable Bootp Tools Help Security Features Security Authentication Security Interface Security Access Methods Warranty Information Product Information Troubleshooting Product Information Life-Support Policy Specifications Following table shows the product specifications forMasterSwitch VM power distribution unit AP9221X166 Product MasterSwitch VM Controller AP9221NX166 AP9221NX166 Help Features Index Outlet Access Outlet operations Index APC Worldwide Customer Support Regional centers