Specifications, Product | American Power Conversion Master Switch

Product Information

Specifications

Product	The following table shows the product specifications for the
specifications	MasterSwitch VM power distribution unit (AP9221X166).
(AP9221X166)
(AP9221X166)		Item		Specification
		Item		Specification

			Electrical

		Input:
		Nominal input voltage		100–230 VAC
		Acceptable input voltage		90–250 VAC
		Nominal input frequency		50/60 Hz
		Input connector		IEC 60320-C20 appliance inlet

		Output:		8 IEC 60320-C13 individually
		Output connectors		8 IEC 60320-C13 individually
		Output connectors		managed
				managed

		Maximum total current draw:		Without loads: 0.2 Amps

			Physical

		Size (H × W × D)		47.0 x 1.75 x 1.75 in.
		Size (H × W × D)		(119.38 x 4.45 x 4.45 cm)
				(119.38 x 4.45 x 4.45 cm)

		Weight:		8.5 lb (3.9 kg)

		Shipping weight:		12 lb (5.5 kg)

		Environmental

		Elevation (above MSL):
		Operating		0 to 10,000 ft (0 to 3000 m)
		Storage		0 to 50,000 ft (0 to 15 000 m)

		Temperature:
		Operating		32 to 104° F (0 to 40° C)
		Storage		32 to 113° F (0 to 45° C)

		Operating Humidity:		0 to 95%, non-condensing

			Approvals

		EMC verification:		FCC Class A, VCCI, CISPR 22
		EMC verification:		Class A, C-Tick
				Class A, C-Tick

		Safety Agency:		UL, CSA, VDE

Continued on next page

MasterSwitch VM User’s Guide

34

Image 39

American Power Conversion Master Switch Specifications, Product, Following table shows the product specifications for

Contents

MasterSwitch VM Thank You Contents MasterSwitch VM Contents Life-Support Policy Warranty InformationTroubleshooting Specifications Feature Description IntroductionProduct Description Introduction MasterSwitch VM Controller Status Description LEDs Operating MasterSwitch VM Configuring outlets for operation Is turned on When these two delays expire, the outlet will be turned on Outlet will be turned on Overload Warning and the load exceeds the Overload Warning Outlets do not turn on when the Overload WarningOutlets always turn on Threshold has been exceeded Management Interfaces Managing MasterSwitch VM Telnet, for remote management Managing MasterSwitch VMControl Console Interface Managing MasterSwitch VM Outlets and menu Password-Protected AccountsAccount access to Account, and up to 16 Outlet User accounts Outlets Menu Items Outlets Menu Items Unit Configuration MasterSwitch VM Outlet Configuration Links Event Log Interface or by pressing C TRL + L in the Control ConsoleDir. You will see a listing similar to the following ftpdir However, you may need to select a four-digit date format MasterSwitch VM unit always uses four-digit yearRepresentation when logging and displaying event data Similar to the following TCP/IP Network Snmp Access Control Telnet/WebDefinition Trap Receiver IP to Snmp Trap Receiver System User ManagerItems Outlet User ManagerFor Outlet User Manager Identification Date/TimeFile Transfer Tools Enable Bootp Help Security Security Features Security Authentication Methods Interface Security Access Product Information Warranty Information Product Information Troubleshooting Life-Support Policy Product SpecificationsFollowing table shows the product specifications for MasterSwitch VM power distribution unit AP9221X166 AP9221NX166 MasterSwitch VM Controller AP9221NX166 Index Help Features Index Outlet Access Outlet operations Regional centers APC Worldwide Customer Support