10 TEST INSTALLED FITTING
With HANDLE (1) in OFF position, turn on WATER SUPPLIES (2) and check all connections for leaks.
Remove AERATOR (3).
Operate HANDLE (1) to flush water lines thoroughly.
Replace AERATOR (3).
CHECK DRAIN CONNECTIONS
Operate
Release
if necessary.
4
WASTE
OUTLET
ON
OFF
1 COLD
HOT
3
5
2
2 | “P” TRAP |
|
11 |
|
| Turn off hot and cold water | |
SERVICE | CAUTION | |||
supplies before beginning. | ||||
|
|
|
|
To remove or replace cartidge
Turn valve to OFF position.
Pull out PLUG BUTTON (1) and remove HANDLE SCREW (2).
Pull off HANDLE (3) and CAP (4).
Unthread CARTRIDGE NUT (5) and remove.
Pull out CARTEIDGE (6).
Inspect CARTRIDGE (6) and
Clean MANIFOLD (8) and rinse clean.
Reinstall CARTRIDGE (6) and
| 2.5mm HEX KEY |
1 | 3 |
| |
| 2 |
| 4 |
REMOVE | INSTALL |
5
If spout drips, operate handle several times from OFF to ON and HOT to | 6 |
COLD position. Do not force - handles turn only 90˚. |
7
8
12 CARE INSTRUCTIONS:
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE.
4