REPAIR PARTS ILLUSTRATION
Alternate anode | 5 | 4 | 1 |
location for top
T & P
2
Anode location for side T & P 
8
When ordering repair parts always give the following information:
1.Model, serial, and product number
2.Type of gas
3.Item number
4.Parts description
Repair Parts List
Item | Parts Description |
No. |
|
1 | DRAFTHOOD |
2 | REDUCER RING - SOME MODELS |
3 | FLUE BAFFLE |
4 | HEAT TRAP (COLD) - SOME MODELS |
5 | HEAT TRAP (HOT) - SOME MODELS |
6 | COLD WATER DIP TUBE |
7 | ANODE ROD |
8TEMPERATURE & PRESSURE RELIEF VALVE (LOCATED TOP OR SIDE)
9DRAIN VALVE
10 GAS VALVE/THERMOSTAT
11 
PILOT ASSEMBLY/THERMOCOUPLE KIT
(Natural Gas)
12 
PILOT ASSEMBLY/THERMOCOUPLE KIT
(L.P. Gas)
13 OUTER DOOR
14 
BURNER (Natural Gas/Low Nox)
15 
BURNER (L.P. Gas)
16 
MANIFOLD DOOR ASSEMBLY (Natural Gas/Low Nox)
17 
MANIFOLD DOOR ASSEMBLY (L.P. Gas)
18 
TWO PIECE WIRE CONNECTOR
WITH RETAINER CLIP
19 MANIFOLD DOOR GASKET
20 VIEWPORT ASSEMBLY
21 THERMOCOUPLE ASSEMBLY (See page 22)
3
6
10
7
9
13
LEGEND
Special anode rod (see page 19)
Temperature and Pressure Relief Valve is required, but may not be factory installed
Unique: Flame Guard® Safety System parts
Pictured on next page.
28
