Little Board P6d Module
2-49
Table 2-46. Functions on Each Setup Page
Page Menu Name Functions
1 Main Menu Select various Setup screens
Load Setup defaults
Save and/or Exit Setup
2 Standard CMOS Setup Set date and time
Enter IDE hard disk parameters
Set type and number of floppy disks
Set default video state
Configure BIOS error handling
Displays amount of installed DRAM memory
3 BIOS Features Setup Enable/disable virus warning message
Enable/disable internal CPU cache
Enable/disable external cache
Enable/disable quick POST
Select boot sequence
Additional floppy parameters
Set NumLock default state
Set initial system speed
Configure keyboard typematic rates
Enable/disable PCI/VGA palette snoop
Select VGA video IRQ
Set watchdog timer parameters
Enable/disable system status messages
Select OS for DRAM > 64MB
Enable/disable shadowing of memory areas
Enable/disable serial console
Enable/disable boot loader
4 Chipset Features Setup Configure memory timing (not recom mended)
Enable/disable cache options
5 Power Management
Setup Set power management level
Set power management options
Set power management timers
Select power management events
6 PCI Configuration
Setup IRQ configuration
IDE interrupt configuration
7 Integrated Peripher als
Setup Set IDE mode
Enable/disable/configure IDE interfaces
Enable/disable support for USB keyboard
Enable/disable floppy disk controller
Enable/disable/configure serial ports
Configure for IrDA support
Enable/disable/configure parallel port
Configure video mode, select flat panel type
Enable/disable Ethernet interface