Little Board P6d Module
2-47Table 2-45. PC/104-Plus Expansion Bus Connector, J3 (A1-D30)PinABCD
1 GND/5.0V KEY4 Reserved +5 AD00
2 VI/O (+5V) AD02 AD01 +5V
3 AD05 GND AD04 AD03
4 C/BE0* AD07 GND AD06
5 GND AD09 AD08 GND
6 AD11 VI/O (+5V) AD10 M66EN1
7 AD14 AD13 GND AD12
8 +3.3V C/BE1* AD15 +3.3V
9 SERR* GND SB0* PAR
10 GND PERR* +3.3V SDONE
11 STOP* +3.3V LOCK* GND
12 +3.3V TRDY* GND DEVSEL*
13 FRAME* GND IRDY* +3.3V
14 GND AD16 +3.3V C/BE2*
15 AD18 +3.3V AD17 GND
16 AD21 AD20 GND AD19
17 +3.3V AD23 AD22 +3.3V
18 IDSEL0 GND IDSEL1 IDSEL2
19 AD24 C/BE3* VI/O (+5V) IDSEL3
20 GND AD26 AD25 GND
21 AD29 +5V AD28 AD27
22 +5V AD30 GND AD31
23 REQ0* GND REQ1* VI/O
24 GND REQ2* +5V GNT0*
25 GNT1* VI/O (+5V) GNT2* GND
26 +5V CLK0 GND CLK1F
27 CLK2 +5V CLK3 GND
28 GND INTD* +5V RST*
29 +12V INTA* INTB* INTC*
30 -12V Reserved Reserved GND/3.3V KEY4
Notes: The shaded cells in the table denote unsupported signals.
Signal M66EN is grounded on the motherboard (Ground = 33MHz bus speed).
The KEY pins are to guarantee proper module installation. Pin A1 will be removed
and the female side plugged for 5.0V I/O signals and Pin D30 will be modified in the
same manner for 3.3V I/O. Both pins will be removed for 3.3/5.0 operation.