AMX AXB-TCR manual IR Emitter connections, Axlink data and power connections

Installation and Wiring

IR Emitter connections

Connect the CC-IRC IR Emitter to the IR Emitter connector, on the rear panel of the television controller (FIG. 3) to transmit IR control signals to the television.

CC-IRC

Television

IR EMITTER	GND
connector	SG

FIG. 3 CC-IRC IR Emitter connector wiring diagram

Axlink data and power connections

Connect the Central Controllers's AXlink connector to the AXlink connector on the rear panel of the television controller for data and 12 VDC power, as shown in FIG. 4.

12 VDC PWR connector

PWR

GND

PWR

AXP

AXlink connector

AXM

GND

no connection

PWR

AXP

Axcess Control System

AXM

GND

FIG. 4 AXlink data and power wiring diagram

Axlink data and 12 VDC power supply connections

Connect the Central Controller’s AXlink connector to the AXlink connector on the rear panel of the television controller, and the optional 12 VDC power supply, as shown in FIG. 5.

12 VDC PWR connector

PWR

GND

PWR

AXP

AXlink connector

AXM

GND

12 VDC power supply

PWR

AXP

Axcess Control System

AXM

GND

FIG. 5 AXlink Data and 12 VDC Power Supply Connections

Use the 12 VDC power supply when the distance between the AMX system and television controller exceeds the limits described in the Wiring Guidelines table on page 7.

8 AXB-TC and AXB-TCR Television Controllers (& Receivers)