User Phone & Pendant

Using your Cancel button to stop

an emergency call

The Cancel button has a dual function. It can be used to stop an emergency call and also to delete entries in the Calls List and Directory.

To stop an emergency call

Cancel

Press and hold down the Cancel

 

 

button until the emergency light stops

 

flashing and beeping.

You will then hear a double beep to confirm the call has been terminated and the display will show:

EMERGENCY

CANCELLED

Warning alerts

If your BT In Touch 2000 User Phone detects that there is no mains power, the telephone line has been disconnected or the batteries are low, it will alert you by playing warning alerts.

It will also convey this information to the Carer as part of the emergency message.

Low batteries

When the batteries have about 2 weeks life left, the phone will announce “Batteries low” and the display will show:

12:00 AM 01 JAN CHANGE BATTERIES

When the batteries are fully drained the phone will announce “Change batteries” and the display will show:

12:00 AM 01 JAN CHANGE BATTERIES

No mains power

When there is no mains power, the phone will announce “No mains power” and the display will show:

12:00 AM 01 JAN NO MAINS POWER

Assuming your batteries are not fully drained, your phone will revert to battery back-up until the mains power is restored. All your Quickdial memory numbers and their emergency status will be therefore be retained.

Please note

(The maximum back-up period is 7 hours - however, if the phone is in constant use, the back-up period could be as little as 1 hour.)

40

Page 40
Image 40
BT In Touch 2000 manual Using your Cancel button to stop An emergency call, Low batteries, No mains power