ENTER MEMORIES

then THEN PRESS STORE

Press the Quickdial memory buttons

you wish to give emergency status. The display shows the memories you have selected for emergency status, for example:

To confirm and change which numbers have emergency status

Store

Press the Store button.

Press the # button.

The display shows, for example:

Phone & Pendant

ENTER MEMORIES

M1

M2

Store

Press Store. The emergency status is

 

 

announced, e.g. “Emergency status on”

 

or “Emergency status off”. The display

EMERGENCY STATUS M1 M2 M3

EMERGENCY STATUS M1 M2

If all 3 numbers have emergency status

If only M1 and M2 have emergency status

User

shows the memories you have set with

emergency status, such as:

EMERGENCY STATUS

M1

M2

These Quickdial memories now have emergency status.

Please note

You cannot allocate emergency status to a Quickdial memory without first storing a telephone number.

If you try, you will hear “Error. Store number first”.

Press the appropriate M1/M2/M3 memory buttons to toggle between emergency status on/off.

Store

Press the Store button to confirm.

Important

If you have not given emergency status to any Quickdial memories, your BT In Touch 2000 User Phone will announce “Warning no emergency numbers” at the end of the programming sequence. This message will only stop when you allocate emergency status to at least one of the Quickdial memory numbers.

23

Page 23
Image 23
BT In Touch 2000 manual Announced, e.g. Emergency status on, Or Emergency status off. The display