Using the Quickdial memories
You should have already stored your User numbers as Quickdial memory numbers. (See page 52).
To dial a Quickdial memory number
| Lift the handset, or press the |
Handsfree | Handsfree button. |
|
Press the required Quickdial memory button, for example M1, M2 or M3.
The number stored on that Quickdial memory button is dialled.
Using the R (Recall) button
R
This button is used with some network services or if your phone line is connected to a switchboard.
To find out more about BT Select Services, please call BT free on 0800 800 150.
Secrecy
To use the Secrecy button
Carer Phone
To change Quickdial memory numbers
Important
You can only change a Quickdial memory number once its emergency status has been removed.
See ‘To confirm and change which numbers have emergency status’ on page 54.
To change a number stored in the memory, repeat the process for storing numbers, but enter the new number (see page 52). The new number will automatically replace the old number. Then give it emergency status again if you wish it to be included as an emergency User number (see page 53).
Secrecy
This allows you to talk to someone in the same room, without the person on the other end of the line hearing your conversation.
Press and hold down the Secrecy
button. The Secrecy light will come on.
Release the Secrecy button to continue your call.
63
