User Phone & Pendant
6 Connect the power cable | 7 Uncoil the pendant receiver aerial |
The pendant receiver aerial which hangs from the back of your BT In Touch 2000 User Phone needs to be uncoiled.
Important
Please do not tamper with the pendant receiver aerial.
Plug the power cable into the socket on the underside of your BT In Touch 2000 User Phone as shown. The cable needs to be pressed into its channel to keep it out of the way. The way you do this will depend on how you have positioned your phone (with or without the base stand,
Please note
The BT In Touch 2000 User Phone has 3 voice prompts to indicate that mains power or the telephone line has been disconnected or that the battery power is low. These are:
“Telephone line disconnected” “No mains power”
“Please change batteries”
You may hear these voice prompts when first setting up your phone. This is perfectly normal and shows the phone’s warning alerts are working.
8 Positioning your BT In Touch
2000 User Phone
Your BT In Touch 2000 User Phone can be positioned in 3 different ways:
Please note
Make sure you test your phone before you finally fix it in position.
•Flat on a table or desk.
•Raised position on a table or desk using the base stand.
18
