BT In Touch 2000 manual Connect the telephone Line cord, Select ringer volume, Select ringer tone

Open the battery cover on the underside of your BT In Touch 2000 User Phone. Insert the 6 x AA Alkaline batteries.

IMPORTANT

The batteries act as a stand-by power source in the event of the mains power being disconnected. If at any time you find that the battery power has been used, you should immediately replace all existing batteries with new batteries. This will ensure that your phone has the maximum stand-by power time.

The batteries taken from your BT In Touch Phone can then be used for any other electrical appliance requiring battery power.

3 Connect the telephone

line cord

If you do not have a modern phone socket, then you can call BT on Freefone 0800 800 150 and ask for a BT engineer to come and fit the correct type. This is a chargeable service.

4 Select ringer volume

RINGER

VOLUME

HI

LOW

OFF

The ringer volume switch is on the underside of your phone.

Set the volume of the ringer to High, Low or Off.

This should be done before you attach the base stand for either raised or wall mounted positions.

5 Select ringer tone

RINGER

R1

R2

R3

The ringer tone switch is on the underside of your phone.

This switch allows you to select the pitch required for the ringer.

R1: for a low-pitched tone

R2: for a medium-pitched tone

R3: for a high-pitched tone

This should be done before you attach the base stand for raised or wall-mounted positions.

User Phone & Pendant

17