BT In Touch 2000 manual Connect the telephone Line cord

Warning

Before installing (or replacing) the batteries, the phone must be disconnected from the phone line and the mains power.

Open the battery cover on the underside of your BT In Touch 2000c Carer Phone. Insert the 6 x AA Alkaline batteries.

Please note

The BT In Touch 2000c Carer Phone will beep and a warning message will appear in the display if the telephone line is disconnected or there is no mains power. Don’t worry - this just means the alert features on the phone are working.

3 Connect the telephone

line cord

If you do not have a modern phone socket, then you can call BT on Freefone 0800 800 150 and ask for a BT engineer to come and fit the correct type. This is a chargeable service.

4 Select ringer volume

RINGER

VOLUME

HI

LOW

OFF

The ringer volume switch is on the underside of your phone.

Set the volume of the ringer to High, Low or Off.

This should be done before you attach the base stand for either raised or wall-mounted positions.

5 Select ringer tone

RINGER

R1

R2

R3

The ringer tone switch is on the underside of your phone.

This switch allows you to select the pitch required for the ringer.

R1: for a low-pitched tone

R2: for a medium-pitched tone

R3: for a high-pitched tone

This should be done before you attach the base stand for raised or wall-mounted positions.

Carer Phone

49