Telephone line disconnected
When the phone line cord is not connected to the phone line socket, the phone will announce “Telephone line disconnected” and the display will show:
TELEPHONE LINE
DISCONNECTED
Optional settings of the BT In Touch
2000 User Phone
You can use the Setup button, located under the memory label, to set and change the optional feature settings.
Voice prompts
When you set voice prompts to ON, your
BT In Touch 2000 User Phone will confirm each numeric key press with an announcement.
For example, if you press 7 you will hear “Seven”.
To set the voice prompts to ON or OFF
Announce | Lift the Quickdial memory label to |
Setup | reveal the Setup button. |
Setup | Press the Setup button. |
Then press the
00 Optional voice prompts ON. Display will show:
VOICE ON
SET UP
With voice prompts set to ON, the following are examples of what you can expect to hear:
If you press the 1 button, “One” will be announced.
If you press the M1 button, “Dialling memory one” will be announced. (Only if emergency status has been given to that Quickdial memory).
01 Optional voice prompts OFF. (Default setting). Display will show:
VOICE OFF
SET UP
Setup | Then press the Setup button to |
confirm the setting.
Emergency cancel timer
The emergency cancel timer is the time the phone takes to start the emergency sequence after you press the Emergency button (on the phone or Pendant). The time can be changed from one to nine seconds in order to help you test your BT In Touch Pendant.
User Phone & Pendant
41
