AMX AXB-TM5 Sendcommand AXBTMX,?DE, Sendcommand AXBTMX,DK, Sendcommand AXBTMX,PIF

Programming

System Send_Commands (Cont.)

Command	Description
'?DE'	Sends the current television power sensor (CC-XPS) delay time string
	’DE,<Time>’ to the AXC-EM. Set the <Time> value in .10 second
	increments.
	Example:
	SEND_COMMAND AXBTMX,'?DE'
	The AXB-TM5 sends the current television power sensor delay time to
	the control system in the ’DE <Time>’ format.
'DK'	Deletes all direct connections set with the ’DC’ command.
	Example:
	SEND_COMMAND AXBTMX,'DK'
'PIF'	Disables the ’PIN’ command.
	Example:
	SEND_COMMAND AXBTMX,'PIF'
'PIN'	Turns on function that will OR together I/O 1 and frequency sensor to
	determine actual TV status. I/O 2 will follow ’PON’ and ’POF’
	commands. The status of this function is stored in permanent memory
	until changed.
	Example:
	SEND_COMMAND AXBTMX,'PIN'
'POD'	Disables the current ’PON’ (power On) or ’POF’ (power Off) command
	settings. Channel 255 changes are enabled.
	Example:
	SEND_COMMAND AXBTMX,'POD'
'POF'	Sends IR function 28 (if available) to turn device power off. After three
	attempts, if the CC-XPS (power sensor) still detects a power-on sta-
	tus, the television controller starts processing stored buffer com-
	mands. Then, if another IR function 28 fails to turn the television's
	power off, the television controller sends a ’PUSH’ and ’RELEASE’ to
	channel 248 and generates a power failure error. If the device is
	turned on manually, this command turns television power off unless
	the television controller receives a ’PON’ (power On) or ’POD’ (disable
	’POF’) command.
	Example:
	SEND_COMMAND AXBTMX,'POF'
'PON'	Sends IR function 27 (if available) to turn device power on. After three
	attempts, if the power sensor (CC-XPS) still detects a power-off sta-
	tus, the television controller starts processing stored buffer com-
	mands. Then, if another IR function 27 fails to turn the television's
	power on, the television controller sends a ’PUSH’ and ’RELEASE’ to
	channel 248 and generates a power failure error. If the device is
	turned off manually, this command turns television power on unless
	the television controller receives a 'POF' (power Off) or 'POD' (disable
	'PON' command) command.
	Example:
	SEND_COMMAND AXBTMX,'PON'

12 AXB-TM5 Television Manager