AMX AXB-TM5 - page 9

Connection and Wiring

AXB-TM5 Television Manager

CC-IRC emitter wiring connections

FIG. 4 shows how to connect a CC-IRC IR Emitter to the IR Emitter connector on the AXB-TM5.

IR emitter to device installation

The following steps describe the installation of the IR emitter to the television IR window.

1. Using a sharp edged tool (knife blade, razor knife, etc.), separate the factory-installed shell as

shown in FIG. 5.

2. Test-fit the IR shield (FIG.6) to the television's IR window. If necessary, use scissors and trim

the shield to fit.

3. Remove the adhesive back covering from the IR shield and place the IR emitter diode into the

mirrored recessed area (FIG. 7) of the shield.

FIG. 4 CC-IRC Emitter wiring connections

FIG. 5 Removing factory-installed shell

FIG. 6 IR shield

FIG. 7 IR emitter diode installed

GND

SIG

CC-IRC

To emitter Television

connector

IR input window

IR shield

IR emitter code

CC-IRC cable assembly