Using the MIO
Using the MIO R-1 AUDIO Remote
Tone Control & SRS Setting
To access the Tone Control and SRS settings, press the TONE button (FIG. 1). This enables the Tone Control Mode with BASS as the first mode selected.
TONE button
FIG. 1 TONE button
There are 3 Tone Control Modes available for adjustment, and 4 SRS options, as follows:
BASS: Increase / Decrease from
Treble: Increase / Decrease from
Balance: Left / Right (Up NAV button = right, Down NAV button = left)
SRS options: BASS Boost, Focus, 3D, WOW
When first entering Tone Control Mode, BASS mode is active. To move from mode to mode, select the Center NAV button. This saves the setting and moves to the next mode.
While in each of the modes, press the Center NAV button to return to the default for that mode.
SRS (WOW, Bass Boost, 3D and Focus) Settings
Use the UP Nav button to cycle through the SRS Settings: BASS Boost, Focus, 3D, WOW (in that order).
Use the Down NAV button to cycle backwards to the previous SRS setting.
Press & hold the Center NAV button to disengage/clear the SRS settings (none of the SRS modes will be engaged).
Press the Center NAV button save SRS Mode & exit from Tone Control
NAV Up
Center NAV button
NAV Down 
FIG. 2 Center NAV button
Only one SRS mode can be engaged per room/zone. Each room/zone, however, can have a different SRS mode.
Moving from one SRS position to another disengages the original setting (for example, moving from WOW to BASS BOOST disengages WOW).
MIO | 15 |
|
|
